The Galaxy Note 7 was recalled on September 2, only two weeks after its initial release. By October 11, the phone had been discontinued globally following reports of continued failures in the replacement models Samsung shipped shortly after.
As of today, 96% of around 3 million Galaxy Note 7 units that were sold and activated have been returned, following a large recall campaign carried out by Samsung, retailers and mobile carriers.
Today, Samsung finally disclosed the results of its intensive investigations on the battery defects that lead to thermal failure of multiple Galaxy Note 7 devices across the globe. The company assigned over 700 engineers to analyze thousands of devices and over thirty thousand batteries. Samsung claims it thoroughly examined every aspect of the device internally to determine the cause of the incident, including: hardware and software related processes, assembly, quality assurance, testing and logistics. On top the internal investigation, the company hired three different firms to provide an objective assessment of the issue at hand, starting with the first recall.
Research & Testing
The most important step was replicating the incident, and for this Samsung built a large-scale charge and discharge testing facility, with hundreds of automated charging and discharging processes for hundreds of Galaxy Note 7 devices. The company used this facility to test likely factors that could have led to the battery incidents. They managed to rule out various probable causes including the effect of fast charging and regular charging through both Samsung's Adaptive Fast Charging technology and Wireless Charging. Testing was also carried out without the device's back to find out whether the back plate's pressure or thermal constraints (introduced by the phone's waterproofing) had a significant impact in the incidence rates. They also tested the Iris Scanner and the USB Type C port, which was subjected to high voltages way past specification. Finally, the company made sure software didn't impact the incidence rates by testing pre-loaded and third-party applications during the test.
Samsung's testing facility shown in the background.
Past this discrete testing environment, Samsung also did a full investigation of component quality assurance, and tracked the handling of all parts throughout the manufacturing process. All of these procedures demonstrated no abnormalities, and the charge and discharge tests both showed similar rates of incidence, indicating that the battery cell itself was at fault. Below is a summation of the conclusions that Samsung arrived to after their own internal investigation and the research done by firms UL, Exponent and TUV Rheinland. The company didn't specify the battery manufacturer's names during the presentation, only referring to them as Company A and Company B, the latter's batteries having been employed in recalled devices.
Battery Analysis Results
The battery provided by company A and by battery B had different strenuous factors that damaged the separator or electrodes, or lead to cell faulting.
In battery A, the design of the cell pouch did not allow enough room for the battery internals, in turn bending the negative electrodes and putting strain in the battery separator. The incidence consistently occurred in the upper-right corner of the "jelly roll", The main cause was thus the deflection of negative electrodes, including incorrect positioning of the negative electrode teeth.
Field tests and disassembles suggested that the issues with batteries from company A came from a combination of assembly and manufacturing issues, as well as issues with the battery design itself. The density of the battery also increased the chances of severe failure, but additional research was needed to pinpoint the cause of the deformed corners putting stress in the negative electrodes. A thinner separator could also have led to poorer protection and reduced tolerance to manufacturing defects. Some batteries also had missing tape on the insulator tab. What's certain is that a combination of deformation at the upper corners, a thin separator and the mechanical stresses due to natural cycling make for a major failure mechanism.
The batteries from company B didn't have device-level compatibility issues that contributed to its failure, but many compounding factors relating to production quality and battery designed came together and led to the Note 7's failure. First, production quality issues included missing insulation tape which increased the incidence rates of battery short circuit. Second, a bigger protrusion of welding points in the tab lead to a higher chance of separator puncture. Finally, general misalignment of insulation tape also increased the risk of failure.
While the battery design itself allowed for more room for the jelly roll, a thinner separator still led to poorer protection and reduced tolerance to manufacturing defects as seen with batteries from company A. Without the apparent flaw in the corners, the combination of missing insulation tape, sharp edged protrusions and a thin separator led to a higher probability of short circuit between the cathode tab and the anode, which resulted in the heating and fire. Exponent found that the most likely root cause for the thermal failure was determined to be internal cell faulting between the positive electrode tab welding defects (tall enough to bridge the gap) and the copper foil of the negative electrode.
Fool me twice…?
It's clear that Samsung went through a lot of trouble to find the root cause of what's likely to go down in history as the biggest, most expensive consumer product recall. While there are many questions that remain unanswered, Samsung did a decent job at disclosing the issues at hand, knowing the constraints that come with extensive supply chains, partnerships, and the like. Overall, Samsung pulled off one last act of transparency that begins redeeming their poor handling of the situation early into the fiasco. The speakers from UL, Exponent and TUV Rheinland arrived to the same conclusions and it does seem that the Note 7 itself was not the main cause of the thermal failure, as this was allegedly ruled out by Samsung's internal testing.
"The incidents with phone explosions, that can happen with any OEM. It could happen with us on our next product, so it should not be something that we use as an opportunity — we should use this as a reminder."
As Carl Pei told XDA in an interview, this is something OEMs need to keep in mind for future quality assurance of their devices, as while Samsung is big enough to weather such storm, a recall on this scale could be devastating to any smaller company. Moreover, this puts into perspective the volatility that manufacturing defects in the order of 80 microns can introduce to a consumer product. Samsung is keen on making sure this scenario never repeats itself, and they are putting forth a broad range of internal quality assurance and safety processes to enhance product safety. Multi-layer safety measures, 8-point battery safety check, and forming a Battery Advisory Group are just some of the items on Samsung's list of prevention measures. It seems that the South Korean giant is determined to gain back consumer trust, so we can't say we expect an issue of this magnitude to come about in 2017.
The Galaxy S8 is very close, so it's only a matter of time before we see whether Samsung can shrug off the bad fame (and unending memes) that the Note 7 brought about.
Does this bring closure to the Note 7 fiasco in your eyes? Let us know what you think!
from xda-developers http://ift.tt/2jePV35
via IFTTT
